Wad Punch 5/8in 16mm

Sheet Metal Punch 16mm

A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches are sold singly without key which should be ordered separately Thread the punch onto the hexagonal screw an...

S330 Socket Set of 34 Metric 1/4in & 3/8in Drive

The Bahco S330 14in & 38in Drive Socket Set Metric with dynamic drive profile Made from high performance alloy steel with a matt finish Confroms to DIN 3120 ISO 1174 Supplied in a plastic case that is made from oil and temperature resistant polypropylene Contents 12 x 38in Hex Sockets 10 11 12 13 14 15 16 17 18 19 20 & 22mm1 x 38in 60 Teeth Quick Release Ratchet2 x 38in Extension Bars 75mm 3in & 1...

DWMT73807 Tough Socket Set 15 Piece 3/8in & 1/4in Drive

The DWMT73807 Tough Socket Set contains a variety of 38in & 14in sockets and accessories all supplied in a compact moulded case for easy storage and tool protection The sockets feature knurled beauty rings that provide a non-slip gripping surface with deep laser etched markings for easy socket size identification Contains3 x 3?8in Spark Plug Sockets 5?8 3?4 13?16in3 x 1?4in Drive Extensions 3 6 10...

Maun 1000-05 Metric Wad Punch Kit 5 - 32mm

Maun Imperial/Metric Wad Punch Kits - Maun 1000-05, This metric wad punch kit from Maun is the ideal collection of pieces for cutting round holes materials suh as rubber, leather and plastic. The kit comprises of a single wad punch handle onto which you can screw a series of nine interchangeable punches. Manufactured to a high standard with handles that are blackened and punches which are heat tre...

Maun 1001-05 Imperial Wad Punch Kit 1/4" - 1"

Maun Imperial/Metric Wad Punch Kits - Maun 1001-05, This imperial wad punch kit from Maun is the ideal collection of pieces for cutting round holes materials suh as rubber, leather and plastic. The kit comprises of a single wad punch handle onto which you can screw a series of nine interchangeable punches. Manufactured to a high standard with handles that are blackened and punches which are heat t...

Sheet Metal Punch 7/8in

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches boxed singly without key which should be ordered separately To use these punches they require a hole to b...

Sheet Metal Punch 5/8in

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches boxed singly without key which should be ordered separately To use these punches they require a hole to b...

Sheet Metal Punch 3/8in

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge The special design allows even load during cutting and produces a burr free hole that needs no extra finishing Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting All punches boxed singly without key which should be ordered separately To use these punches they require a hole to b...

Stanley 1-87-192 Socket Set of 40 Metric 1/4in & 3/8in Drive

Stanley-Socket-Set-of-40-Metric-1-4in-3-8in-Drive-Stanley-1-87-192-Contents-LI-11-1-4in-Sockets-4-4-5-5-5-6-7-8-9-10-11-13mm-LI-10-3-8in-Sockets-10-11-12-13-14-15-16-17-18-19mm-LI-1-3-8in-Ratchet-Handle-200mm-LI-1-1-4in-Spinner-Handle-150mm-LI-1-Extension-150mm-LI-1-3-way-adaptor-3-8in-F-x-1-4in-M-LI-1-Universal-Joint-LI-1-Hex-Bit-Adaptor-1-4inF-x-1-4in-Hex-F-LI-3-Slotted-Bits-4-5-5-7mm-LI-3-Phill...

Metric Wad Punch Kit 1000/05

Kits comprise of a single wad punch handle onto which screws a series of nine interchangeable punches The handles are blackened and punches heat treated and chemically blacked The handle should be struck with a hammer or mallet onto a wooden block The spring loaded plunger in the handle enables holes to be accurately centred and serves to eject the slug The metric set contains 5 6 8 10 125 16 20 2...

Imperial Wad Punch Kit 1001/05

Kits comprise of a single wad punch handle onto which screws a series of nine interchangeable punches The handles are blackened and punches heat treated and chemically blacked The handle should be struck with a hammer or mallet onto a wooden block The spring loaded plunger in the handle enables holes to be accurately centred and serves to eject the slug The metric set contains 5 6 8 10 125 16 20 2...

Punch & Chisel Set 12 Piece

High quality chrome vanadium steel chisels for cutting shaping wrought iron cast iron steel brass bronze copper and aluminium Cutting bolts nuts and rivets Punches are also made from chrome vanadium steel to precise specifications and are used for marking centre lines hole locations and pilot drill starting points Set of 12 contains 10 12 and 16mm 38 12 and 58 in cold chisels15 3 4 5 6 and 8mm 116...

Stanley 4-18-299 Punch & Chisel Set 12 Piece

Stanley-12-Piece-Punch-Chisel-Set-Stanley-4-18-299-High-quality-chrome-vanadium-steel-chisels-for-cutting-shaping-wrought-iron-cast-iron-steel-brass-bronze-copper-and-aluminium-Cutting-bolts-nuts-and-rivets-Punches-are-also-made-from-chrome-vanadium-steel-to-precise-specifications-and-are-used-for-marking-centre-lines-hole-locations-and-pilot-drill-starting-points-LI-Set-of-12-contains-LI-10-12-an...

Maun 2230-200 Revolving Punch Pliers 200mm (8in)

Maun-2230-200-Revolving-Punch-Pliers-200mm-Maun-2230-200-These-revolving-punch-pliers-for-Maun-has-been-designed-to-punch-round-holes-in-soft-material-such-as-leather-etc-Equipped-with-6-heat-treated-punches-of-different-sizes-which-are-held-on-a-locking-taper-solid-steel-drum-The-correct-size-punch-can-be-selected-by-simply-rotating-the-drum-the-sizes-are-2-2-5-3-0-3-5-4-and-5mm-5-64-3-32-7-64-1-...

S380 Socket Set of 38 Metric 3/8in Drive

Bahco S380 38 piece 38 in drive socket set arranged in a blow moulded plastic case Set comprises- 17 x 38 Hex sockets 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 and 22mm12 x 38 Hex sockets 14 516 1132 38 716 12 916 58 1116 34 1316 and 78mm3 x 38 Extension bars 75mm3 in 150mm6 in and 250mm 10 in1 x 38 Universal joint1 x 38 Reversible ratchet1 x 38 Sliding T-bar2 x 38 Spark plug sockets 16mm 58 and...

Stanley 1-12-006 No.6 Fore Plane (2.3/8in)

Stanley-No-6-Fore-Plane-2-3-8in-Stanley-1-12-006-The-Bailey-Fore-plane-performs-a-dual-role-between-stock-removal-and-truing-up-long-edges-or-levelling-wide-boards-LI-It-is-fully-adjustable-and-has-a-machined-frog-and-cutter-seatings-to-reduce-chatter-LI-It-also-has-a-special-cap-iron-design-which-curves-shavings-and-prevents-clogging-LI-Length-460-mm-18in-LI-Cutter-width-60-mm-2-3-8in-Stanley-1-1...

Stanley 0-16-876 Dynagrip Bevel Edge Chisel With Strike Cap 16mm (...

Stanley Dynagrip Bevel Edge Chisels with Strike Cap - Stanley 0-16-876, Wood chisel with steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel reassurance of strength and durability and the pre-sharpened blade is ready for immediate use.Size 16mm (5/8 in) Stanley 0-16-876 Dynagrip Bevel Edge Chisel W...

Stanley 4-18-288 Cold Chisel 16 x 171 mm (5/8in x 6.3/4in)

Stanley Cold Chisels - Stanley 4-18-288, Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.Size 170 x 16mm (6 3/4 x 5/ 8 in) Stanley 4-18-288 Cold Chisel 16 x 171 mm (...

Wera 05073261001 8000B Zyklop Multifunction Ratchet, 3/8in

Wera-05073261001-8000B-Zyklop-Multifunction-Ratchet-3-8in-Wera-05073261001-This-Zyklop-ratchet-from-Wera-has-a-rotating-mass-design-and-freewheel-sleeve-and-a-swivelling-ratchet-head-with-4-defined-lock-positions-and-is-suitable-for-use-with-3-8in-square-sockets-and-3-8in-adaptors-with-square-drive-Multicomponent-Kraftform-handle-gives-comfort-and-torque-Wera-05073261001-8000B-Zyklop-Multifunction...

Stanley 4-18-290 Cold Chisel 22 x 203 mm (7/8in x 8in)

Stanley Cold Chisels - Stanley 4-18-290, Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.Size 200 x 22mm (8 x 7/8 in) Stanley 4-18-290 Cold Chisel 22 x 203 mm (7/8in...

Vaughan Steel Eagle Claw Hammer with Free Punch Set 567g (20oz)

The Vaughan Steel Eagle Claw Hammer is made from high carbon steel that is perfectly weighted with improved geometry for balance and control Fitted with an injection moulded handle that has been permanently bonded to the shaft for increased durability Comes with a FREE Punch Set they are fitted with a two component grip and come in the following sizes 08mm 132in 16mm 232in & 24mm 332in Made in the...